A, the prevention of parts corrosion: corrosion effect on the mountain push grader parts, sometimes not easy to be found, easy to be ignored, more harmful. Rain, air chemicals and other mechanical parts through the pipes, gaps and other infiltration into the machinery, corrosive parts. Corroded parts continue to work will also accelerate the mechanical wear and tear, increasing mechanical failure. This requires managers and operators to be based on the local weather conditions at the time, site site conditions, to take reasonable construction arrangements, as far as possible to reduce the harm of chemical corrosion on mechanical parts.
Second, keep working at the rated load: the nature of the excavator work load, the size of the loss of mechanical parts has an important impact. Generally speaking, the wear and tear of the Shantui grader parts will increase with the increase in load. When the load on the Shantui grader parts is higher than the designed working load, its wear will increase. Under the same conditions, the stable load than the high frequency of dynamic load on the parts of the wear and tear less, less failure, longer life.
Third, to maintain a reasonable temperature of the parts: in the work, the temperature of each component has its own normal range. The temperature is too high and too low will affect the strength of the parts, so you need to work with coolant and lubricating oil to control the temperature of some parts, so that they work in a reasonable temperature range.
Four, timely cleaning, reduce the impact of mechanical impurities: mechanical impurities generally refers to dust, dirt and other substances and construction machinery in the use of some of their own metal chips, grease, etc.. Once these impurities reach between the working surface of the machinery, the harm is great: not only make the friction increase, oil consumption rise; and will damage the lubricating oil film, scratches with the surface.